RHOSS KCMS/PCM Série Mode D'emploi page 32

I.2.5.2 Description of the symbols displayed on the
LCD display
2
1
12
11
10
Ref. meaning
1 Heating
2 Cooling
3 Dehumidificati on
4 Automatic mode
5 Occupanc y func tion = enabled
6 On fi xed = occ upied
On blinki ng = temporaril y occ upi ed
7 Sleep function
8 Limited keypad functi on
9 Fan and operating mode
10 Set fan speed (min/med/max)
11 Fan speed in automatic mode
12 Displays the temperature probe, Set-point or acti ve
alarm c ode
Manual mode: Cooling
Switc h the device on from the ON/OFF key and
press the M key repeatedl y until the cooling
symbol appears.
Set the desired temperature from the UP and
DOWN keys and set the desired fan speed from
the F AN key (min, med, max, Auto).
The "cooling" symbol blinks until the water
temperature i n the c oil is reached in or der to
prevent unpleasant fl ows of hot air.
Manual mode: Heating
Switc h the device on from the ON/OFF key and
press the M key repeatedl y until the heating
symbol appears.
Set the desired temperature from the UP and
DOWN keys and set the desired fan speed from
the F AN key (min, med, max, Auto).
The "heating" s ymbol blinks until the water
temperature i n the c oil is reached in or der to
prevent unpleasant fl ows of cold air.
Manual mode: Dehumidification
Switc h the device on from the ON/OFF key and
press the M key repeatedl y until the
dehumi dification s ymbol appears.
Set the desired temperature from the UP and
DOWN keys and set the desired fan speed from
the F AN key (min, med, max, Auto).
The "dehumidific ation" s ymbol blinks until the
water temperature in the coil is reached.
Manual mode: Ventilation
Switc h the device on from the ON/OFF key and
press the M key repeatedl y until the ventilation
symbol appears.
Set the desired fan s peed from the F AN key
(min, med, max, Auto). The s peed will remain
fixed at the medium setting if the "Auto" mode is
set.
3
4
5
6
7
8
9
32
Automatic mod e
Switc h the device on from the ON/OFF key and
press the M key repeatedl y until the AUTO
symbol appears.
Set the desired temperature from the UP and
DOWN keys and set the desired fan speed from
the F AN key (min, med, max, Auto).
The operating mode is set by the elec tronic
control according to the Set- point.
Night-time mode: Sleep
The Sl eep function can be used during the night-
time to offs et the room temperature.
The temperature is i ncreas ed by 1 degree when
in the "cooling" mode and decr eased by 1
degree when i n the "heating" mode.
Set the Sleep mode by pr essing the Sleep key
repeatedly until the desired duration ( hours) is
reached (from 1 to 9). The remai ning operating
hours are dis played by pressi ng the SLEEP key
once.
The functi on is deacti vated when press ed onc e
again. The functi on is also deacti vated if a power
cut occ urs.
Lock function
The mode is s et to AUTO when the Loc k
functi on s ymbol appears. The user can s witch
the unit on and off, modify the Set-point and s et
the fan speed, whereas the other func tions are
bloc ked.
Note: enable the functi on by setting dip-s witch 3
in the ON position (see par agraph 0)
SECTION I: USER