Publicité
Assembly
Connect the handle assembly to the machine.
1. Unpack machine.
4. Align the teeth on the bushing and
handle assembly before tightening
the adjustment know.
7. The wire harness must be aligned
with the patterns on the connector
to fit.
2. Use phillips screwdriver to unscrew
4 screws and remove cover.
5. Spin the adjustment knob clockwise
to tighten.
8. Screw the cover back with
the 4 screws.
3. Insert handle assembly in between
bushings. Insert the shoulder bolt
through the bushing and screw into
the handle assembly using supplied
wrench.
6. Attach the wire harness
to the machine.
5
Publicité
