Télécharger Imprimer la page

Dustbane Power Clean 900 XT Manuel De Pièces Et D'opérations page 13

Publicité

troubleshooting
Caution! Unplug power cord before servicing machine components.
Power cord may be diconnected at the twist lock or wall outlet. Check connections and reconnect if necessary.
Wall outlet breaker may have tripped.
Circuit breaker tripped.
Solution tank in-line filter valve may closed.
Switch is in OFF (O) or AUX (II) position.
Brush switch is not on.
No water in solution tank.
Solution hoses may be clogged or kinked.
Solution tank in-line filter may be clogged.
The spray jets may be clogged.
Circuit breaker tripped.
Belt is damaged.
Debris is lodged in the housing.
Switch is in OFF (O) position.
Recovery dome lid is not seated properly.
Recovery tank is not seated properly over intake tube.
Recovery tank dump hose may not be closed properly.
Bad seals on recovery dome lid.
Vac shoe may be clogged.
Vac shoe may be worn.
Circuit breaker may have tripped.
Motor carbon brush may be worn.
Machine does not function
CAUSE
no water dispensed from spray jets
CAUSE
Spray intermittent or streaked
CAUSE
Brush does not turn On
CAUSE
Solution recovery is reduced
CAUSE
Vacuum motor does not start
CAUSE
PROBLEM
Reset breaker.
PROBLEM
Reset breaker.
Open valve.
Flip switch to ON (I) position.
Flip brush switch ON (I)
Fill solution tank.
PROBLEM
Check hose for clogs, remove any debris if found. Replace kinked
hose if found.
Clean strainer thoroughly.
Remove the spray tips and clean as required. Do not clean out
the hole in the jet with a pin or wire. This may cause permanent
streaking.
PROBLEM
Reset breaker.
Replace belt.
Remove debris.
Flip switch to ON (I) position.
PROBLEM
Reposition dome lid.
Reposition recovery tank so the intake tube is inserted into the inlet.
Disconnect cap from drain hose then reconnect, to ensure
the cap and hose snap together.
Check the gasket on the lid for damage. Replace if needed.
Check vac shoe for debris and remove if necessary.
Replace vac shoe.
PROBLEM
Reset breaker.
Contact a qualified service technician.
SOLUTION
SOLUTION
SOLUTION
SOLUTION
SOLUTION
SOLUTION
13

Publicité

loading

Ce manuel est également adapté pour:

19384