weinor Terrazza Pure Notice De Maintenance Et D'utilisation page 18

Wartungs- und Gebrauchsanleitung | Onderhouds- en gebruiksaanwijzing | Maintenance Instructions and Directions for Use | Notice de maintenance et d'utilisation
Fault
Creaking noises in the guttering
or roof support
Condensation on glass panes
Tiny air bubbles in glass
Minor scratches in the glass
Pimples on powder-coated parts
Minor deviations in the colour of
powder-coated parts
Minor scratches on powder-
coated parts
Flash rust, pollutants
– The blades are slightly tilted
18
Terrazza Pure | 123311-0000 | v3.4 | 2020-03-18
Cause
– Different materials expand differently
when warm. This may result in an audi-
ble creaking sound.
– Condensation forms as a result of water
vapour in the air dripping onto cold sur-
faces when the air is below its so-called
dew point temperature.
– Minor quantities of air have been trap-
ped in the glass during production and
show up as bubbles.
– Production tolerances
– Minor accumulations have arisen while
powder coating the parts.
– Despite using the same RAL colours,
there is always a possibility of two parts
being slightly different in colour. This
especially occurs when using metal or
iron effect paint.
– Production tolerances
– Particles in the air settle on the unit's
components, resulting in minor traces
of corrosion.
– Pitch necessary for the water to drain
Remedy
None, as the expansion is unavoidable.
Cannot be remedied. The possibility of condensation occur-
ring cannot be excluded.
The amount of condensation can be reduced by: airing,
heating, change of use.
Cannot be remedied.
A visual assessment is generally made in accordance with
the guidelines of the respective national associations and/or
the manufacturers.
Replace the panes/leafs (specialist retailer).
A visual assessment is generally made in accordance with
the guidelines of the respective national
associations and/or the manufacturers.
Cannot be remedied.
A visual assessment is generally made in accordance with
the guidelines of the respective national
associations and/or the manufacturers.
Cannot be remedied.
A visual assessment is generally made in accordance with
the guidelines of the respective national
associations and/or the manufacturers.
Touch-up pen
A visual assessment is generally made in accordance with
the guidelines of the respective national
associations and/or the manufacturers.
Treat with water and/or standard household stainless steel
cleaners.
Not necessary!
weinor GmbH & Co. KG