Important Safety Instructions; Overview - Tripp-Lite SmartRack AG-039A Manuel Du Propriétaire

Important Safety Instructions

SAVE THESE INSTRUCTIONS
All sections of this manual contain instructions and warnings that should be followed during the installation and use of the SmartRack Enclosures
described in this manual. Read all instructions and warnings thoroughly before attempting to move, install or use the SmartRack Enclosures described
in this manual. Failure to comply will create a risk of personal injury and property damage and may invalidate the warranty.
• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants, dust and direct sunlight.
• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation
openings of the enclosure.
• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a mechanical
device such as a forklift or pallet jack to move the enclosure in the shipping container.
• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.
• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.
• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible. The casters are designed for
minor position adjustments within the final installation area only. The casters are not designed for moving the enclosure over longer distances.
• The casters are not designed to provide long-term support for the enclosure after final installation. Use the levelers to provide long-term support.
• Install the enclosure in a structurally sound area with a level floor that is able to bear the weight of the enclosure, all equipment that will be installed in
the enclosure and any other enclosures and/or equipment that will be installed nearby.
• Install the cabinet securely to the building structure, using the shipping brackets as illustrated in the Enclosure Installation section of this manual.
• Do not push the enclosure from the side panels to move it. Pushing from the side panels will cause a tipping hazard.
• When rolling the enclosure on its casters, always push it from behind, never pull it toward you.
• A rolling enclosure can cause personal injury and property damage if not properly supervised. If rolling the enclosure down a ramp is required, use
extreme caution. Do not attempt to use ramps that have a slope steeper than 1:12.
• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.
• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage that will
void the warranty.
• Do not re-ship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet ("SP1" models only). The combined weight of
the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any damage that occurs during re-shipment.
• DANGER: STABILITY HAZARD, RACKS ARE TO BE INSTALLED BY QUALIFIED SERVICE PERSONNEL ONLY.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended.

Overview

SmartRack Enclosures accommodate all standard 19-inch rackmount equipment, regardless of vendor, and ship fully assembled for quick and easy
deployment. They feature adaptable, heavy-duty cabinets in 24U, 42U, 45U, 47U and 48U heights, with or without side panels. Several models are
available with an integrated shock pallet that allows resellers, integrators and enterprise customers to pre-configure equipment and re-ship the enclosures
to the final installation site.
SmartRack Enclosures have variable mounting depths, ideal for servers. Integrated baying hardware enables cost-effective, orderly and efficient expansion.
The cabinets include quick-release doors and side panels for convenient maintenance and split rear doors for improved access and reduced clearance
requirements. Front access doors are reversible for installation flexibility. Front and rear doors and side panels are lockable.
Model # Rack Height
SR24UB 24U
SR24UBEXP 24U
SR24UBEXPSP1 24U
SR24UBSP1 24U
SR25UB 25U
SR42UB 42U
SRX42UB* 42U
SR42UBCL 42U
SR42UBDP 42U
SRX42UBDP* 42U
SRX42UBDPEXP* 42U
SR42UBDPWD 42U
SRX42UBDPWD* 42U
SRX42UBDPWDEXP* 42U
SR42UBEXP 42U
SRX42UBEXP* 42U
SR42UBEXPND 42U
SR42UBEXPSP1 42U
SR42UBSP1 42U
SR42UBWD 42U
*SRX-Series SmartRack Enclosure
Available SmartRack Enclosures
Side Panels Shock Pallet
Yes No
No No
No Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes No
No No
Yes No
Yes No
No No
No No
No No
No No
No Yes
Yes Yes
Yes No
Model # Rack Height
SRX42UBWD*
SRX42UBWDEXP*
SR42UBWDCL
SR45UB
SRX47UB*
SRX47UBEXP*
SRX47UBDP*
SRX47UBDPEXP*
SRX47UBWD*
SRX47UBWDEXP*
SRX47UBDPWD*
SRX47UBDPWDEXP*
SR48UB
SR48UBCL
SR48UBDP
SR48UBDPWD
SR48UBEXP
SR48UBEXPSP1
SR48UBSP1
SR50UB
SR52UB
SR52UBDP
SR55UB
See the Specifications section for more information.
2
Side Panels Shock Pallet
42U Yes
42U No
42U Yes
45U Yes
47U Yes
47U No
47U Yes
47U No
47U Yes
47U No
47U Yes
47U No
48U Yes
48U Yes
48U Yes
48U Yes
48U No
48U No
48U Yes
50U Yes
52U Yes
52U Yes
55U Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
No
No
No
No