Maintenance - Panasonic BT-LH1800P Mode D'emploi

How To Use On Screen Menu
INPUT SELECT
_ SDI input unit mounted [BT-Y200P]
[INPUT SELECT]
>[LINE A,B/S-VIDEO]
NON-STANDARD
[SDI]
INPUT SELECT SDI menu
SDI
Used to set the input format of SDI.
Set-value (underlined is default value)
AUTO 480/60I* 1)
1)
* 480/59.94I signal is displayed as 480/60I.
_ Component/RGB input unit mounted [BT-YA100P]
[INPUT SELECT]
>[LINE A,B/S-VIDEO]
NON-STANDARD
[YPbPr/RGB]
YPbPr
COMPONENT LEVEL
[RGB]
RGB-SYNC
INPUT SELECT YPbPr/RGB menu
YPbPr/RGB
Used to select the input of YPbPr/RGB.
Set-value (underlined is default value)
YPbPr RGB
YPbPr
Used to select the format in case of YPbPr input.
Set-value (underlined is default value)
AUTO* 1) 1080/60I*
1080/24psF 1035/60I*
576/50I 480/60P*
COMPONENT LEVEL (480/60I only)
Used to select the input level of component. Select SMPTE
for the signal from MII VTR, and B75 for the signal of 7.5%
setup of Betacam VTR.
Set-value (underlined is default value)
SMPTE B75
(continued)
AUTO
OFF
AUTO
576/50I
AUTO
OFF
YPbPr
AUTO
SMPTE
AUTO
EXT
2) 1080/50I
2) 720/60P* 3)
4) 4)
480/60I*
INPUT SELECT
RGB
Used to select the format in case of RGB input.
Set-value (underlined is default value)
AUTO* 1) 1080/60I*
2)
1035/60I* 720/60P*
4)
480/60P* 480/60I*
RGB-SYNC (When RGB is input.)
Used to select Ext. Sync/GREEN-On-SYNC.
Set-value (underlined is default value)
EXT G-ON
* 1) In AUTO setting, the settings of display size, status display, and
matrix are same as for 1080I even in case of 1035I input. When
desired to use 1035I setting, set it to 1035/60I.
* 2) 1080/60I and 1035/60I are different with respect to the display
size and the matrix used. Select 1080/60I and 1035/60I even in
case of 1080/59.94I and 1035/59.94I signal input. The status will
be correctly displayed on the screen.
3)
* Select 720/60P even in case of 720/59.94P signal input. The sta-
tus will be correctly displayed on the screen.
* 4) 480/59.94I and 480/59.94P signals are displayed as 480/60I and
480/60P.

MAINTENANCE

[MAINTENANCE]
RUNNING TIME
OPERATION
LCD
BACKLIGHT
FAN
MAINTENANCE menu
With MAINTENANCE selected, the following menu will ap-
pear.
OPERATION
The total operation time of the whole LCD monitor is displayed.
LCD
The operation time of the LCD panel is displayed.
BACKLIGHT
The operation time of the backlight is displayed.
FAN
The operation time of the exhaust fan is displayed.
(continued)
2) 1080/50I
3)
576/50I
4)
0H
0H
0H
0H
9