Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Operating
Instructions
Before attempting to connect, operate or adjust this product, please read thess instructions completly.
Printed in Japan
VQT9586
Model BT-H1700P
UNDER
PULSE
COLOR
DEGAUSS
SCAN
CROSS
OFF
SLOT 1
SLOT 2
A
B
C
D
INPUT SELECT
VOLUME
MENU
SCREENS
ASPECT
AREA
CHECK
MARKER
Multi-Format Monitor
SLOT 3
POWER
E
F
P
LCT1110-001A
1001-PN-I-U-VP

Publicité

Chapitres

Table des Matières
loading

Sommaire des Matières pour Panasonic BT-H1700P

  • Page 1 Operating Instructions Model BT-H1700P UNDER PULSE COLOR DEGAUSS SCAN CROSS SLOT 1 SLOT 2 SLOT 3 POWER INPUT SELECT VOLUME MENU SCREENS ASPECT AREA CHECK MARKER Multi-Format Monitor Before attempting to connect, operate or adjust this product, please read thess instructions completly.
  • Page 2: Safety Precautions

    CAUTION: Changes or modifications not approved by monitor to rain or moisture. Dangerous high voltages PANASONIC could void the user’s authority to operate the are present inside the unit. Do not remove the back equipment. cover of the cabinet. When servicing the monitor,...
  • Page 3: Table Des Matières

    CONTENTS SAFETY PRECAUTIONS ................ 2 CONTROLS AND FEATURES ..............4 CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) ..............6 PREPARATION ..................8 BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ..............9 HOW TO USE “MAIN MENU”............... 10 HOW TO USE “SETUP MENU” ............13 HOW TO USE EXTERNAL CONTROL ..........
  • Page 4: Controls And Features

    CONTROLS AND FEATURES FRONT VIEW <Front Panel> UNDER PULSE COLOR DEGAUSS SCAN CROSS SLOT 1 SLOT 2 SLOT 3 POWER MENU BLUE ASPECT AREA INPUT SELECT VOLUME CHECK MARKER 9 10 11 12 16 17 18 19 20 21 22 23 UNDER PULSE COLOR...
  • Page 5 REAR/SIDE VIEW <Rear Panel> <Side Panel> REMOTE MAKE RS-232C MAIN POWER COLOR OFF button/lamp Refer to pages 8 and 9 for correspondence between the input terminals and the INPUT SELECT buttons. Press the COLOR OFF button. The button lights and the screen becomes monochrome.
  • Page 6: Controls And Features (Input Card: Optional)

    CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) VIDEO INPUT CARD (OPTIONAL: BT-YA701P) Video input/output terminals Input (IN) and output (OUT) terminals for video signals. The IN and OUT terminals are bridge-connected. VIDEO 1 (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) Select VIDEO 1 : press INPUT SELECT A/C/E button VIDEO 2...
  • Page 7 SDI INPUT CARD (OPTIONAL: BT-YA703P) Output terminal for a selected component serial digital signal Output terminal for s selected digital signal (the input SWITCHED displayed on the screen). The output signal is cable- compensated. NOTE: When the monitor’s power is OFF, no digital signal is output.
  • Page 8: Preparation

    (on the rear side of the monitor) in which you are going to install the card. Slot cover Rear side of the BT-H1700P multi-format monitor 3. Insert the Input Card’s board (green- coloured) into the slot, fitting the board into the guide rails on the top and bottom 3.
  • Page 9: Basic Menu Operations (Main Menu, Setup Menu)

    BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ABOUT MENU SCREENS BASIC MENU OPERATION ● To select an item, This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen). Press the buttons to move the cursor (4) on the The MAIN MENU contains the functions normally used, and Menu Screens and select the desired item.
  • Page 10: How To Use "Main Menu

    HOW TO USE “MAIN MENU” “MAIN MENU” ITEMS The following items appear in MAIN MENU. Items Functions Displays APERTURE CONTROL Compensates the frequency characteristics of the input video signal. SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. sub menu POSITION Selects the display position of the sub menu superimposed on the screen.
  • Page 11 ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. APERTURE CONTROL 3. sub menu POSITION Compensates the frequency Items : Selects the display position of the sub menu <APERTURE CONTROL> characteristics of the input superimposed on the screen. LEVEL video signal. Press the Settings : UPPER/LOWER CONTROL FREQ.
  • Page 12 5. AREA MARKER-R R-Y PHASE Items : Selects the size marker for the other screen ratio R/B GAIN 0.79 (aspect) used when the screen ratio is 16:9. (for ITU601 external control) G-Y PHASE Settings : OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2 G/B GAIN 0.45 Functions : OFF: The marker is not displayed.
  • Page 13: How To Use "Setup Menu

    HOW TO USE “SETUP MENU” “SETUP MENU” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel. 3 COLOR TEMP./BAL. Sets or adjusts the colour temperature or white balance.
  • Page 14 HOW TO USE “SETUP MENU” (cont'd) ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. FUNCTION SETTING Item : CONTRAST Selects the colour system and Adjustment displays the monitor’s power- <FUNCTION SETTING> range : –20 ~ 00 ~ +20 up time or the total usage time. COLOR SYSTEM :AUTO Function...
  • Page 15 3. COLOR TEMP./BAL. 4. SIZE/POSI. ADJ. Sets or adjusts the colour Adjusts the size or position of temperature or white balance. the picture. Press the <COLOR TEMP./BAL.> <SIZE/POSI. ADJ.> Press the button to display COLOR TEMP. :LOW button to display the setting H.SIZE BLUE DRIVE :000...
  • Page 16 5. DISTORTION ADJ. 6. STATUS DISPLAY Compensates the picture Makes the status of the input <STATUS DISPLAY> distortion. Press the button signal appear or disappear on <DISTORTION ADJ.> STATUS DISPLAY to display the setting menu the screen. Press the PINCUSHION 1080/1035 :1080 PIN.BALANCE...
  • Page 17: How To Use External Control

    HOW TO USE EXTERNAL CONTROL ABOUT EXTERNAL CONTROL This multi-format monitor has two external control terminals. One is the MAKE terminal, which controls the monitor by connecting the terminals with many functions to the ground (GND) terminal. The other is the RS-232C terminal, which allows the monitor to be controlled by a PC via serial communication.
  • Page 18 HOW TO USE EXTERNAL CONTROL (cont.) HOW TO USE THE RS-232C TERMINAL You can control the monitor from your PC via the RS-232C terminal. For details on operating the monitor from the PC, consult your dealer or service centre for details. 1.
  • Page 19: Troubleshooting

    TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorised dealer or service centre for assistance. Reference Problems Points to be checked Measures (Remedy) pages No power supply...
  • Page 20 TROUBLESHOOTING (cont.) Reference Problems Points to be checked Measures (Remedy) pages Irregular colour Is the monitor placed or moved close to Move the device away from the monitor. Press the DEGAUSS button on the front panel to a speaker or any other device degauss the screen.
  • Page 21: Specifications

    SPECIFICATIONS Type : Multi-format monitor D1 serial digital (using the BT-YA703P) Picture Tube : 17" measured diagonally HD serial digital (using the BT-YA704P) Effective Remote Inputs : • Point-of-contact connection, 1 line, Screen Size : Width : 330 mm D-sub connector (15-pin 3-line) Height : 250 mm •...
  • Page 22 Compliant Signal Formats of Each Input Card Input Signals BT-YA701P BT-YA702P BT-YA703P BT-YA704P NTSC (3.58 MHz) — — — PAL (4.43 MHz) — — — Black-and-White (50 Hz/60 Hz) — — — 480/60i (525i) — — 480/60p (525p) — — —...
  • Page 23 SPECIFICATIONS (INPUT CARD: OPTIONAL) BT-YA701P: VIDEO INPUT CARD Type : Video input card for multi-format monitor : VIDEO 1/VIDEO 2: 2 lines, BNC connector x 4 (1 V (p-p), 75 Ω) Inputs/Outputs Synchronised signal (EXT.SYNC): 1 line, BNC connector x 2 (1.0 V – 4.0 V (p-p), 75 Ω) * The input (IN) and output (OUT) terminals are bridge-connected.
  • Page 24 Executive Office: One Panasonic Way, Panazip 3E-7, Secaucus, New Jersey 07094 Eastern Zone Office: One Panasonic Way, Panazip 4E-7, Secaucus, NJ 07094 (201) 348-7303, Fax (201) 348-7372 Western Zone Office: 6550 Katella Ave., Panazip 17A-5, Cypress, CA 90630 (714) 373-7840, Fax (714) 373-7242...
  • Page 25 Manuel d’instructions Model BT-H1700P UNDER PULSE COLOR DEGAUSS SCAN CROSS POWER SLOT 1 SLOT 2 SLOT 3 MENU SCREENS ASPECT AREA INPUT SELECT VOLUME CHECK MARKER Moniteur Multi-Format Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil. Imprimé au Japon...
  • Page 26 ● Dans ce manuel d’instructions, toutes les explications (sauf du tube à rayons cathodiques avec un chiffon doux. Ne pas où c’est indiqué) se réfèrent au BT-H1700P avec des cartes appliquer de diluant ni de benzine. Ces produits chimiques d’entrée installées.
  • Page 27 SOMMAIRE PRÉCAUTIONS DE SÉCURITÉ .............. 2 COMMANDES ET FONCTIONS ............. 4 COMMANDES ET FONCTIONS (CARTE D’ENTRÉE: EN OPTION) ............6 PRÉPARATIFS ..................8 OPÉRATIONS DE BASE DES MENUS (MENU PRINCIPAL, MENU DE RÉGLAGE) ........... 9 UTILISATION DE “MAIN MENU” ............10 UTILISATION DE “SETUP MENU”...
  • Page 28: Commandes Et Fonctions (Carte D'entrée: En Option)

    COMMANDES ET FONCTIONS VUE DE FACE <Panneau avant> UNDER PULSE COLOR DEGAUSS SCAN CROSS SLOT 1 SLOT 2 SLOT 3 POWER INPUT SELECT VOLUME MENU BLUE ASPECT AREA CHECK MARKER 9 10 11 12 16 17 18 19 20 21 22 23 UNDER PULSE COLOR...
  • Page 29 VUE DE DERRIÈRE/VUE DE CÔTÉ <Panneau arrière> <Panneau latéral> REMOTE MAKE RS-232C MAIN POWER Touche/témoin COLOR OFF Témoin d’alimentation Appuyer sur la touche COLOR OFF. La touche s’allume Éteint : L’alimentation générale est coupée. et l’écran devient monochrome. Lorsque la touche Orange : L’alimentation générale est mise en marche, COLOR OFF est pressée tout en étant allumée, elle...
  • Page 30 COMMANDES ET FONCTIONS (CARTE D’ENTRÉE: EN OPTION) CARTE D’ENTRÉE VIDÉO (EN OPTION: BT-YA701P) Prises d’entrée/sortie vidéo Prises d’entrée (IN) et de sortie (OUT) pour signaux vidéo. Les prises IN et OUT sont raccordées en sonde. (Lorsqu’il n’y a pas de câble raccordé à la prise OUT, le VIDEO 1 signal d’entrée est terminé...
  • Page 31 CARTE D’ENTRÉE SDI (EN OPTION: BT-YA703P) Prise de sortie pour un signal numérique série à composantes sélectionné Prise de sortie pour un signal numérique sélectionné SWITCHED (l’entrée est affichée sur l’écran). Le signal de sortie est compensé pour le câble. REMARQUE: Lorsque l’alimentation du moniteur est coupée, aucun signal numérique n’est sorti.
  • Page 32: Préparatifs

    Capot de fente Côté arrière du moniteur multi- format BT-H1700P 3. Introduire la platine de la carte d’entrée (colorée en vert) dans la fente, en présentant 3. Fixer le masque large avec les vis (serrer 2 vis la platine dans les rails guides sur le haut et le de chaque côté).
  • Page 33: Opérations De Base Des Menus (Menu Principal, Menu De Réglage)

    OPÉRATIONS DE BASE DES MENUS (MENU PRINCIPAL, MENU DE RÉGLAGE) À PROPOS DES ÉCRANS FONCTIONNEMENT DE DE MENU BASE DES MENUS ● Pour sélectionner un poste, Ce moniteur dispose d’un écran de menu principal (MAIN MENU) et d’un écran de menu de réglage (SETUP MENU). Appuyer sur les touches pour déplacer le curseur Le “MAIN MENU”...
  • Page 34: Utilisation De "Main Menu

    UTILISATION DE “MAIN MENU” POSTES DE “MAIN MENU” Les postes suivants apparaissent dans MAIN MENU. Postes Fonctions Affichages APERTURE CONTROL Compense les caractéristiques de fréquence du signal vidéo entré. SLOT CONDITION Affiche l’état des cartes d’entrée installées dans chacune des fentes de carte d’entrée. sub menu POSITION Sélectionne la position d’affichage du menu secondaire superposé...
  • Page 35 CONTENU DES POSTES ET PLAGE D’AJUSTEMENT/RÉGLAGES 1.APERTURE CONTROL 3. sub menu POSITION Compense les caractéristiques Poste : Sélectionne la position d’affichage du menu <APERTURE CONTROL> de fréquence du signal vidéo secondaire superposé sur l’écran. LEVEL entré. Appuyer sur la touche Réglages : UPPER/LOWER CONTROL FREQ.
  • Page 36 5. AREA MARKER-R R-Y PHASE Poste : Sélectionne le marqueur de taille pour l’autre R/B GAIN 0.79 rapport d’écran utilisé quand le rapport ITU601 d’écran est 16:9. (pour commande externe) G-Y PHASE Réglages : OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2 G/B GAIN 0.45 Fonctions : OFF: Le marqueur n’est pas affiché.
  • Page 37: Utilisation De "Setup Menu

    UTILISATION DE “SETUP MENU” POSTES “SETUP MENU” Postes Fonctions 1 FUNCTION SETTING Affiche le retard pour la mise en marche du moniteur ou la durée totale d’utilisation. 2 PICTURE SUB ADJ. Effectue des ajustements approximatifs en utilisant les boutons de commande du panneau avant. 3 COLOR TEMP./BAL.
  • Page 38 UTILISATION DE “SETUP MENU” (Suite) 1. FUNCTION SETTING Poste : CONTRAST Sélectionne le système couleur Plage d’ajustement : –20 à 00 à +20 et affiche le retard pour la mise <FUNCTION SETTING> Fonction : Pour un ajustement approximatif du en marche du moniteur ou la COLOR SYSTEM :AUTO contraste de l’image.
  • Page 39 3. COLOR TEMP./BAL. 4. SIZE/POSI. ADJ. Règle ou ajuste la température Ajuste la taille ou la position de de couleur ou la balance des l’image. Appuyer sur la touche <COLOR TEMP./BAL.> <SIZE/POSI. ADJ.> blancs. Appuyer sur la touche COLOR TEMP. :LOW pour afficher le menu de H.SIZE...
  • Page 40 5. DISTORTION ADJ. 6. STATUS DISPLAY Compense la distorsion Fait apparaître ou disparaître <STATUS DISPLAY> d’image. Appuyer sur la touche sur l’écran l’état du signal <DISTORTION ADJ.> STATUS DISPLAY pour afficher le menu de d’entrée. Appuyer sur la touche PINCUSHION 1080/1035 :1080 PIN.BALANCE...
  • Page 41: Utilisation De La Commande Externe

    UTILISATION DE LA COMMANDE EXTERNE À PROPOS DE LA COMMANDE EXTERNE Ce moniteur multi-format a deux prises de commande externe. L’une est la prise MAKE, qui commande le moniteur en raccordant les bornes avec de nombreuses fonctions à la borne de masse (GND). L’autre est la prise RS-232C, qui permet au moniteur d’être commandé...
  • Page 42 UTILISATION DE LA COMMANDE EXTERNE (Suite) UTILISATION DE LA PRISE RS-232C Vous pouvez commander le moniteur à partir d’un ordinateur personnel via la prise RS-232C. Pour des détails sur le fonctionnement du moniteur à partir d’un ordinateur personnel, consulter le revendeur ou un centre de service. 1.
  • Page 43: En Cas De Difficultés

    EN CAS DE DIFFICULTÉS Des solutions aux problèmes usuels relatifs à votre moniteur sont décrits ici. Si aucune des solutions présentées ici ne résout le problème, débrancher le moniteur et consulter un revendeur ou un centre de service agréé pour de l’assistance.
  • Page 44 EN CAS DE DIFFICULTÉS (Suite) Pages de Problèmes Points à vérifier Mesures référence Couleur Le moniteur est-il placé ou déplacé Éloigner l’appareil du moniteur. irrégulière près d’un haut-parleur ou de tout autre Appuyer sur la touche DEGAUSS sur le panneau appareil incorporant un aimant? avant pour démagnétiser l’écran.
  • Page 45: Caractéristiques Techniques

    CARACTÉRISTIQUES TECHNIQUES Type : Moniteur Multi-Format Entrées de Tube image : 17" (43 cm) mesuré en diagonale télécommande : • Raccordement par point de contact, Taille effective 1 ligne, connecteur D-sub de l’écran : Largeur : 330 mm (15 broches sur 3 rangées) Hauteur : 250 mm •...
  • Page 46 Formats de signal conformes de chaque carte d’entrée Signaux d’entrée BT-YA701P BT-YA702P BT-YA703P BT-YA704P NTSC (3,58 MHz) — — — PAL (4,43 MHz) — — — Noir et blanc (50 Hz/60 Hz) — — — 480/60i (525i) — — 480/60p (525p) —...
  • Page 47 CARACTÉRISTIQUES TECHNIQUES (CARTE D’ENTRÉE: EN OPTION) BT-YA701P: CARTE D’ENTRÉE VIDÉO Type : Carte d’entrée vidéo pour moniteur multi-format : VIDEO 1/VIDEO 2: 2 lignes, connecteur BNC x 4 (1 V (cc), 75 Ω) Entrées/sorties Signal synchronisé (EXT.SYNC): 1 ligne, connecteur BNC x 2 (1,0 V – 4,0 V (cc), 75 Ω) * Les prises d’entrée (IN) et de sortie (OUT) sont raccordées en sonde.
  • Page 48 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905)624-5010...

Table des Matières