Oceanic OCEAHC180B8 Guide D'utilisation page 51

Troubleshooting
FAILURE
The light is on, but the
fan is not working.
The light and the fan
do not work.
Excessive vibration
The hood does not
suck properly.
Any other failure
ELECTRICAL CONNECTION DIAGRAM
Engine
Additional information
POSSIBLE REASON
The fan blade is damaged.
The engine is damaged.
The halogen bulb of the lamp
is burned.
The power plug is loose.
The fan blade is damaged.
Fan motor is not securely
fixed.
The unit is not properly
attached to the support.
The distance between the
unit and the cupboard plates
is too big.
The reason can only be
identified after the diagnosis
of a technician.
Bulb
SOLUTION
Turn off the appliance. Repair must only be
performed by a qualified technician.
Replace the bulb with a new bulb of the same
type.
Connect the plug correctly.
Turn off the appliance. Repair must only be
performed by a qualified technician.
Turn off the appliance. Repair must only be
performed by a qualified technician.
Remove the unit and check if the support is
properly installed.
Adjust the distance of:
Gas cooktops:
Electric cooktops:
Coal/oil cooker:
Contact an authorized After-Sales Service.
23
70 cm
70 cm
80cm