Control Panel And Temperature Setting - Wine Cell'R WC54SST2 Manuel D'instructions

•
To prevent damaging the door gasket, make sure to have the door opened fully all the
way before pulling the shelves out.
• Please store wine in sealed bottles.
• Do not cover the shelves with aluminum foil or any other shelf material which may
prevent air circulation.
• Should the cellar be left empty for long periods it is suggested that the appliance is
unplugged.After careful cleaning, leave the door open to allow air to circulate inside the
cabinet in order to avoid possible condensation, mold or odors forming.
OPERATING YOUR WINE CELLAR
Your wine cellar has a control panel with display window on the front of the door. It includes several
features to operate and control the temperature of both the UPPER and LOWER zones of the wine cellar.
(a) Control Panel and Temperature Setting
●
POWER : Press to turn on the control panel back light buttons if they are off.
●
To turn off your wine cellar for cleaning or extended absence, press the power button
once. After the unit beeps once, hold the power button for 10 seconds and your wine cellar will shut
itself off. Once the wine cellar has been turned off, please allow at least 5 minutes before starting
up again. This will limit excessive wear on the compressor.
UNLOCK: Press for 3 seconds to unlock the control panel.
LIGHT: Your wine cellar comes equipped with 3 different lighting options: Red, Blue, or a Red & Blue
cycle where the color changes every 10 seconds. Press the light button once and the lights will run on
a 10-second cycle, alternating between Red & Blue. Press the light button again and the color will
change to only Blue.
Press the light button again and the color will change to Red. Finally, pressing a button a 4
turn off the lights.
°C/°F: Press to alter the temperature display in Fahrenheit or Celsius.
Bl u e
R e d /Bl u e
R e d
(interchange by 10s)
O ff
18
th
time will