Installing The Activepure/Rci Cell; Installing The Rear Lint Screen - EcoQuest Fresh Air Everest Guide D'utilisation

INSTALLING THE ACTIVEPURE/RCI CELL

To Install:
Rear Lint Screen
follow steps 4 - 8
ActivePure/RCI cell
follow steps 1 - 8
2
2. Replace
the two (2)
thumbscrews
and tighten.

INSTALLING THE REAR LINT SCREEN

4
4. Replace
Note: The bottom
of the rear lint
screen is held
into place by two
alignment guides
(see inset).
WARNING: Do not operate
Fresh Air Everest without the
rear lint screen and back cover
properly installed.
the rear
lint screen,
inserting
the bottom
of the lint
screen first.
1
1. Replace the
ActivePure/RCI
cell in the unit by
aligning the holes in
the ActivePure/RCI
cell brackets and
the studs on the
ActivePure/RCI cell
hanger.
3
3. Insert the
ActivePure/RCI
cell connector
into the
plug on the
ActivePure/RCI
cell bracket.
For disassembly instructions,
Press connector
firmly until the
see page 8 .
two tabs lock
into place.
5
5. Secure the
top of the
lint screen by
replacing the
two (2) lint
screen holder
thumbscrews.
7
7. Replace
the back
cover
screw.
For disassembly instructions,
see page 8 .
6
6. Replace
the back
cover by
snapping
into place.
Note: be
sure the tab
is correctly
inserted.
8
8. Reinstall the
power cord.
9
french english