Maintenance Reminders; General Maintenance - EcoQuest Fresh Air Everest Guide D'utilisation

MAINTENANCE REMINDERS

REPLACE ACTIVEPURE/RCI CELL
The ActivePure/RCI cell is no longer working correctly or
may be improperly installed .
• Replace the ActivePure/RCI cell (replacement
ActivePure/RCI cells are available from your local
EcoQuest Business Owner) .
• Please Note: The ActivePure/RCI cell should be
replaced every two (2) years, even if the unit does not
display this message.
PERFORM CLEANING
(approx . every 30 days)
• Clean the rear lint screen (see page 6) .
• Vacuum the ActivePure/RCI cell .
• Vacuum front and rear grill openings .
RESETTING THE REMINDERS
The only reminder you need to reset is the PERFORM
CLEANING reminder (after performing maintenance,
press the Reminder Reset button and the screen will
momentarily display CLEARED to let you know the
reminder has been cleared) . All the other service reminders
will clear automatically once the unit has been turned off
and back on and the problem has been corrected .

GENERAL MAINTENANCE

Periodic maintenance is required to insure that your
Fresh Air Everest operates properly . The unit will display
a PERFORM CLEANING reminder when it is time to
perform regular maintenance . If you are operating your
unit in a severely polluted environment, cleaning of the
unit, ActivePure/RCI cell, and rear lint screen should be
done more frequently . Shown here are basic procedures
that should be carried out to keep your unit running at
top performance .
6
GENERAL MAINTENANCE
CLEANING THE CASE:
Wipe the unit with a soft cloth dampened (not wet) with
water . Do not use chemicals or solvents . Vacuum the front
and rear grills periodically to remove any lint buildup .
CLEANING THE ACTIVEPURE/RCI CELL:
Remove the ActivePure/RCI cell and carefully vacuum
accumulated lint . Do not wash the ActivePure/RCI cell .
Damage from water may result .
REAR LINT SCREEN CLEANING:
You have two options to clean the rear lint screen:
1 . When visibly dirty, simply remove the rear lint screen
Be sure to
press the
from the unit (see page 8), and with a hand-held
Reminder
vacuum, remove the heavy particulate . This method will
Reset button
to clear the
extend the life of the lint screen .
reminder
following
2 . When visibly dirty, remove the lint screen from the
regular
maintenance
unit (see pages 8 - 9), carefully vacuum, then wash
(see below).
in hot water (do not use soap) . Allow to dry prior to
reinstalling . Replace if damaged .
REAR LINT SCREEN REPLACEMENT:
Contact your EcoQuest Business Owner for replacement
lint screens . See pages 8 - 9 for removal and installation
instructions .
CAUTION: Unplug the unit before performing any
maintenance procedures.
CHANGING THE ACTIVEPURE/RCI CELL:
The ActivePure/RCI cell should be changed when
REPLACE RCI CELL appears on the display, or every
two (2) years, whichever comes first . To change the
ActivePure/RCI cell, follow the instructions on pages 8 - 9 .
(CONT .)