Troubleshooting - EcoQuest Fresh Air Everest Guide D'utilisation

TROUBLESHOOTING

INDICATORS OF OPERATION:
When the unit is on, the LCD display will show either the
fan setting and RCI PUR . OFF or RCI PUR . ON .
TROUBLESHOOTING - WHAT TO LOOK FOR FIRST.
1. I have plugged in the unit, pressed the ON button on
the remote (or the unit), and nothing happens... what's
wrong?
• Make sure the power cord is inserted completely into
the receptacle on the back of the unit .
• Make sure the electrical outlet is capable of providing
power to the unit .
• Make sure the rear lint screen and back cover are
properly installed .
• Check to see if the proper fuse is installed and that it is
operational .
2. The UV lamp is not functioning/I'm getting a "Replace
RCI Cell" message.... what's wrong?
• Check ActivePure/RCI cell for proper installation .
• Replace the ActivePure/RCI cell .
3. What are the most typical application problems?
• Symptom: A belief that the proper equipment is
placed in the environment and the equipment appears
unsuccessful .
Problem: Lack of air movement, improper placement
of the unit .
• Symptom: Strong odors still remain within the
environment after placement.
Problem: Improper placement of the unit, or the source
of the odor has not been eliminated.
• Symptom: Visual haze of smoke and/or particulate
remain within the environment.
Problem: Lack of ionization and/or air movement.
4. Air flow is restricted or reduced.
10
• Is the unit properly placed away from objects that may
obstruct air flow?
• Are the rear lint screen, back cover, and front grill clean?
• Is the ActivePure/RCI cell clean?
CAUTION: Do not look directly at the glowing lamp.
Prolonged exposure, even to reflected UV light,
can cause eye damage according to the American
Conference of Governmental Industrial Hygienists
(ACGIH) Standards. Fresh Air Everest emits UV light
which can cause eye damage if the light were looked at
continuously, for 20 minutes or more, at a distance of
one (1) inch or less.
5. How can I tell if the ActivePure/ RCI cell is functioning?
• The ActivePure/RCI cell will produce a glow that is
visible through the front grill under low light conditions .
6. Unit does not operate.
• Is the unit plugged in?
• Are you sure the outlet is active?
• Is the main power switch turned on?
• Are the rear lint screen and back cover installed
properly?
• Does the fuse need to be replaced?
If your unit fails to operate properly after performing
trouble-shooting, contact your EcoQuest Business Owner
for further assistance . Contact EcoQuest at:
EcoQuest International
310 T. Elmer Cox Drive
Greeneville, TN 37743
1-800-989-2299
or visit www.EcoQuest.com for additional support .