Publicité
Les langues disponibles
Les langues disponibles
Heat selection switch
Depending on the model the options available on the control knob may vary, see Fig.4. The following table explains the opera-
tion of each knob position.
Mode
SAFETY FEATURES
This appliance incorporates a number of safety devices.
In addition to the 'Important Safety Advice' section your attention is drawn to the following;
operates, unplug the unit immediately. Allow the heater to cool down completely and remove the cause of the over heating.
Reconnect the power - normal operation should be resumed.
Tilt switch
in any direction.
If the heater is tipped over while it is hot, disconnect the power and allow it to cool, then stand the heater back upright.
Reconnect the power - normal operation should be resumed.
Note: The tilt switch mechanism makes a muted rattling noise when the product is moved or tilted, this is not a fault, this noise
is normal.
ADDITIONAL
This circulates the heat better and results in a reduced heat up time and a more even heat distribution.
The turbo fan is turned On and Off using the Control knob.
Important Notes
Although this heater is manufactured to comply with the relevant safety standards, certain types of carpets could become dis-
coloured by the temperatures under a portable heater. If you are concerned about this, we recommend that you contact the carpet
manufacturer for guidance.
Alternatively, stand the heater on a suitable base to shield the carpet – call our Helpline for further advice.
This does not cause a safety hazard.
The heat outlet grille may become discoloured with use – this is caused by airborne pollution and is not a fault.
Operation
Off
Low heat
High heat
High heat with turbo fan
FR
DE
EN
NL
PL
SV
21
Publicité
