Milwaukee M18 FDDEXL Notice Originale page 10

TECHNICAL DATA
Type
Production code
Stroke max.
Drilling capacity max.
Drill bit length max.
Drilling depth max.
Weight
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent applications,
with diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all
instructions. Failure to follow the warnings and instructions may
result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
It is also essential that you read and follow the user manual
for the hammer drill you use.
ROTARY HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool. Loss of control
can cause personal injury.
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring.
Cutting accessory contacting a „live" wire may make exposed
metal parts of the power tool „live" and could give the operator
an electric shock.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Do not use the dust extractor for drilling work in wood, steel or
plastic.
Do not use machines on any material containing asbestos.
The following materials should not be picked up by the
vacuum cleaner:
• hazardous dust
• fl ammable, explosive dust (e.g. magnesium or aluminium dust,
etc.)
Despite using the dust extractor, a small amount of dust may still
escape.
The dust produced when using this tool may be harmful to
health. Do not inhale the dust. Use a dust absorption system and
wear a suitable dust protection mask. Remove deposited dust
thoroughly, e.g. with a vacuum cleaner.
Only use the appliance if it is in perfect condition.
Never use the dust extractor without a fi lter, or if the fi lter is
damaged.
18
M18 FDDEXL M18 FPDDEXL
Dust extractor Dust extractor
4834 10 01 XXXXXX MJJJJ 4834 17 01 XXXXXX MJJJJ
152 mm 203 mm
ø 16 / 26 mm ø 16 / 32 mm
210 mm 260 mm
152 mm 203 mm
1,9 kg 2,0 kg
SPECIFIED CONDITIONS OF USE
The dust extractor is designed for the extraction of dust in drilling
applications with hammer drills in stone and concrete.
M18 FDDEXL: The dust extractor may only be used as an
accessory for the following machines: Milwaukee M18 FH, M18
FHX, M18 ONEFH, M18 ONEFHX
M18 FPDDEXL: The dust extractor may only be used as an
accessory for the following machines: Milwaukee M18 ONEFHP,
M18 ONEFHPX
Do not use this product in any other way as stated for normal
use.
RESIDUAL RISK
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
hazards may arise in use and the operator should pay special
attention to avoid the following:
• Injury caused by vibration.
Hold the product by designated handles and restrict working
time and exposure.
• Exposure to noise can cause hearing injury.
Wear ear protection and limit exposure.
• Injury due to fl ying debris
Wear eye protection, heavy long trousers, gloves and
substancial footwear at all times.
• Inhalation of toxic dusts.
WORKING INSTRUCTIONS
Never use the dust extractor without dust box and HEPA fi lter in
place.
CLEANING
Never use water or compressed air to clean the dust box or
HEPA fi lter.
The ventilation slots of the machine must be kept clear at all
times.
ENGLISH
MAINTENANCE
Use only Milwaukee accessories and Milwaukee spare parts.
Should components need to be replaced which have not been
described, please contact one of our Milwaukee service agents
(see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the machine type printed as well as the six-digit No. on
the label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before
starting the machine.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any
work on the machine.
Always wear goggles when using the machine.
Wear ear protectors!
Wear a suitable dust protection mask.
Wear gloves!
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose electric tools, batteries/
rechargeable batteries together with household
waste material.
Electric tools and batteries that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH 19