Food Processing Hints - Bella NutriRocket Manuel D'instructions

9. To process, turn the processing tumbler (tall or small) clockwise into
the motor base and press down on the top of the tumbler until locked
in place. The blender will operate.
WARNING: Do not operate the motor continuously for more than
3 minutes at a time. Allow the motor to rest for 3 minutes
before continuing.
10. When processing is completed, turn the tumbler counter-clockwise
in the base and lift to remove the tumbler/blade assembly.
11. Invert the tumbler/blade assembly. Hold the tumbler (tall or small)
firmly in one hand. Use the other hand to turn the blade collar
counter-clockwise and remove the blade from the processing tumbler.
12. Add the tumbler ring to any tumbler to drink fresh juice, blended drinks
or smoothies immediately. Press down to fasten the tumbler ring to any
of the blending tumblers.
13. Add the travel lid (with locking spout) to serve fresh juice, blended
drinks or smoothies. Twist lid clockwise to lock securely onto the tall
tumbler. Flip top over pouring spout and press firmly to lock.
(See Figure 5.) Lock the travel lid to take your smoothie to go or add
the solid lid to store leftovers in the refrigerator for up to 24 hours.
14. Unplug the NutriRocket Personal Blender when not in use
and before cleaning.

Food Processing Hints

WARNING: Do not operate the motor continuously for more than 3 minutes at
a time. Allow motor to rest for 3 minutes before continuing.
WARNING: Never overfill the processing tumbler. The maximum capacity of
the tall tumbler is 24 oz./3 cups. The maximum capacity of the small cup is 12
oz./1.5 cups.
• For best results, solid foods should not be larger than 1-inch pieces.
Cut or tear food into pieces approximately equal in size before
processing.
• Fasten the shaker lid to either tumbler (tall or small). Use the shaker lid
to serve or pour: bread crumbs, grated Parmesan cheese, chocolate,
flavored sugars, or coarse spice blends.
-310785_14022_13984 BELLA NutriRocket EFS IM.indd 8
Open Locked/Closed
8
Figure 5
2013-07-12 3:26 P