Processing Capacity Chart; Before Using For The First Time; Operating Instructions; Blender Jar Assembly - Bella ROCKET EXTRACT PRO PLUS Manuel D'instructions

Processing Capacity Chart

Description
Blender Jar
Tumblers (2),
Tumbler (1)

Before Using for the First Time

Carefully unpack the Rocket Extract Pro Plus Blender Set and remove all packaging materials.
Check the contents to ensure that all attachments and accessories are present (see Figure 1), and have been
received in good condition.
1. Handle all blade attachments: blending blade and chopping blade by their collars only.
WARNING: Do not touch blades. Blending and chopping blades are very sharp. Use extreme care when
handling. Failure to do so can result in personal injury.
2. Wash all accessories and attachments in warm, soapy water before first use. Rinse thoroughly.
• 1 large (32 oz.) blender jar and lid with removable measuring cap
• 2 tall (24 oz.) tumblers and 1 short (12 oz.) tumbler
• 1 tumbler ring
• 1 storage lid
• 1 travel lid
• 2 blade attachments: blending and chopping.
3. Wipe the motor base with a damp cloth.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.

Operating Instructions

IMPORTANT! All blade attachments: blending blade
and chopping blade include a white plastic ring that
creates an airtight seal during processing (See Figure
3). Always check to be sure the white seal ring is
present and properly fitted into the collar before use.
1. Place the motor base on a flat, clean, dry counter
top or table.
2. Make sure the blender is unplugged.
3. Depending on the amount of food to be
processed, use the large (32 oz.) blender jar, any
tall (24 oz.) tumbler or the short (12 oz.) tumbler.

Blender Jar Assembly

1. Using the blade's collar to handle, place any of
the 2 blade attachments: blending blade and
chopping blade into the base of the blender jar.
(See Figure 4.) Always check to be sure the ring is
present and properly fitted into the collar before
use. Turn clockwise to tighten the blade assembly
until snug.
IMPORTANT: Make sure the blade assembly is
properly attached to the base of the blender jar
before adding food for processing.
2. Add food to be processed to the blender jar.
NOTE: When blending, foods or liquids tend to
expand as they rise up the side of the blending
jar. Do not fill blending jar more than the Max
Line, 4 cups (32 oz.) with food to be processed.
(Please consult the Processing Capacity Chart.)
3. WARNING: Never overfill the blender jar. To avoid
or personal injury, leakage or damage to the
Rocket Extract Pro Plus Blender Set, do not fill
more than the Max Line.
4. WARNING: Pay close attention while processing.
Never operate the Rocket Extract Pro Plus Blender
when the blender jar is empty.
SO-311573_14285 BELLA REPP Blender IM R1.indd 7
Size Capacity
Large 40 oz.
Tall 24 oz.
Short 12 oz.
MAX Process Ice Cubes
4 cups (32 oz.) 10 (2 cups) + 3/4 cup liquid
3 cups (24 oz.) 7 (1-1/2 cups) + 1/2 cup liquid
1 cup+ (9 oz.) 5 (1-1/4 cups) + 1/4 cup
White seal
ring
Never fill blender
jar more than the
Max Line!
7
Figure 3
Figure 4
2014-05-14 12:42 PM