Blending/Chopping In The Blender Jar; Blending/Chopping In The Tall Or Short Tumble - Bella ROCKET EXTRACT PRO PLUS Manuel D'instructions

Blending/Chopping in the Blender Jar

1. Make sure the measuring cap is firmly positioned
in the lid.
2. Add the blending jar lid onto the blender jar and
twist clockwise. An audible click can be heard as
the lid is locked and sealed.
Blending/Chopping in the Tall or
Short Tumbler
1. Add up to 3 cups (24 oz.) food to the tall tumbler
or 1+ cup (9 oz.) food to the short tumbler.
WARNING: Never overfill the tall or short
tumbler. To avoid personal injury, leakage or
damage to the Rocket Extract Pro Plus Blender
Set, do not fill more than the Max Line. (Please
consult the Processing Capacity Chart.)
2. Holding any tumbler firmly in one hand, grasp the collar of any of the 2 blade attachments: blending blade
or chopping blade
Always check to be sure the ring is present and properly fitted into the collar before use. Insert the blade
into the top of tumbler. (See Figure 5.) Use the other hand to tighten by turning the blade collar clockwise
until snug.
WARNING: Never operate the Rocket Extract Pro Plus Blender when the tumbler is empty.
IMPORTANT: Always add at least 1/4 to 1/2 cup liquid to food before processing. It may be necessary to
add more liquid, depending on the density of the food and the desired final results.
3. Invert the tumbler assembly before placing on the motor base.
4. Insert the blade collar into the motor base,
fitting the tabs into the slots on the motor base
(See Figure 6). Pressing the lid or tumbler firmly
down into the base, turn clockwise until the blade
attachment tabs lock securely in position.
5. Plug the power cord into a 120V AC electrical
outlet. Press the POWER button. The POWER
indicator light will illuminate.
WARNING: To avoid spills, make sure the lid
is closed securely before pressing any PRE-
PROGRAMMED/SPEED buttons.
6. Press the desired PRE-PROGRAMMED/SPEED
button to begin processing.
IMPORTANT: The Rocket Extract Pro Plus Blender will not operate unless the 3 locking tabs on the blade
collar are properly fitted into the 3 slots on the motor base.
IMPORTANT! This Blender is equipped with a safety device that will cause control panel lights to flash
if the blade collar is not locked properly in position on the motor base. Press the STOP button and
adjust the blade collar. Reposition blade collar. Press any PRE-PROGRAMMED/SPEED button and resume
operation.
7. Press the lighted button to stop blending when desired consistency is reached. Check results and if
necessary, stir in liquid, water, juice (preferably organic) or stock (preferably organic) to thin puréed food
until the desired consistency is reached.
WARNING: Do not operate the motor continuously for more than 1 minute at a time. Allow the motor to
rest for 3 minutes before continuing. The motor will automatically shut off after a minute of continuous
use as a safety measure.
8. After processing food in the blender jar, turn the lid counter-clockwise to unlock and remove lid from
blender jar. (See Figure 4.) The spouted blender jar makes pouring easy.
9. After processing food in the tumbler, invert the cup/blade assembly. Hold the tumbler firmly in one hand.
Use the other hand to turn the blade collar counter-clockwise, and then lift blade attachment up and out of
the tumbler. (See Figure 5.)
10. Press the tumbler ring onto the lip of the tumbler to enjoy fresh processed juice, smoothies, or blended
drinks immediately.
11. Add the storage lid to store freshly processed food.
12. Unplug the Rocket Extract Pro Plus Blender when not in use and before cleaning.
SO-311573_14285 BELLA REPP Blender IM R1.indd 8
8 8
Figure 5
Never fill any
tumbler more
than the Max
Line!
Figure 6
2014-05-14 12:42 PM