Additional Important Safeguards; Notes On The Plug; Notes On The Cord; Plasticizer Warning - Bella ROCKET EXTRACT PRO PLUS Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ADDITIONAL IMPORTANT
1.
All users of this appliance must read and understand this Instruction Manual
before operating or cleaning this appliance.
2.
The cord to this appliance should be plugged into a 120V AC electrical outlet only.
3.
If this appliance begins to malfunction during use, immediately press the STOP,
POWER, or active button (indicator light is illuminated).
4.
If this appliance falls or accidentally becomes immersed in water, unplug it
immediately. Do not reach into the water!
5.
Do not use this appliance after it has fallen into or becomes immersed in water.
6.
To reduce the risk of injury to persons or property, never use this appliance in an
unstable position
7.
Do not use this appliance for other than its intended use.
8.
Do not use if the blender jar or tumbler is cracked or chipped.
IMPORTANT: Do not overfill. Never fill beyond the Max Line on the blender jar
or any tumbler.
WARNING: Failure to add enough liquid before processing may cause the
Body Reset Blending Set blender jar or tumbler to break or chip.
WARNING: To avoid spills, make sure the lid is locked securely before pressing
any PRE-PROGRAMMED/SPEED buttons.

NOTES ON THE PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.

NOTES ON THE CORD

The provided short power-supply cord should be used to reduce the risk resulting from
becoming entangled in or tripping over a longer cord. Do not use an extension cord
with this product.

PLASTICIZER WARNING

CAUTION: To prevent Plasticizers from migrating to the finish of the counter top or
table top or other furniture, place NON-PLASTIC coasters or place mats between the
appliance and the finish of the counter top or table top. Failure to do so may cause the
finish to darken; permanent blemishes may occur or stains can appear.

ELECTRIC POWER

If the electrical circuit is overloaded with other appliances, your appliance may not
operate properly. It should be operated on a separate electrical circuit from
other appliances.
SO-311573_14285 BELLA REPP Blender IM R1.indd 4
SAFEGUARDS
4
2014-05-14 12:42 PM

Publicité

Table des Matières
loading

Table des Matières