AnteaMED oppla Mode D'emploi page 40

detect movement, the �me to send data to the pla�orm will back to normal repor�ng �me interval(TIxxS/M/H) )
Command: NMxxM/H
Note: xx=00~99, M=Minute, H=Hour
Example: NM90M
A�er send the above command, device will transmit data every 90 minutes to the pla�orm when device no mo�on.
7. Check APN & IP, Port
Command: G1
The device will reply "APN: internet; Name: xxx; Password: xxxx; Port: 5050; IP:www.smart-tracking.com"
8. Change IP and Port
Command: IP1,IP/domain name,port
Example: IP1,103.21.211.11,5050 or IP1,www.smart-tracking.com,5050
9. Built-in Memory
The device built in 8Mb flash memory inside. It will store the GPS informa�on when do not have GSM network coverage (i.e., very low popula�on density
areas, some mountainous terrain, underground areas etc). The device will transmit GPS loca�ons to the WEB server automa�cally once the GSM network is
recovered.
10. Delete stored tracking history data
Command: ush
The device will stop sending the stored tracking history data to tracking pla�orm.
- 20 -
GPS tracking system
EN