AnteaMED oppla Mode D'emploi page 28

The device will reply: · Set mobile number 3 OK!
※
To delete this number, you can send
2. Incoming call control
Command: Z0
After send above command, device only answer the call automatically from authorized numbers. (authorized numbers mean number A, number B, number C)
Command: Z1
After send above command, device can answer the call automatically from all numbers.
3. Modify the Time zone
Command: TZ+ +00/-00
Note: the time must amounts be in 2 digits and at maximum 23 hours in value. "+" in the "time zone" portion of the text indicates east. The symbol "-" in the
"time zone" indicates west.
Example: tz+02, the system will add 2 hours based on the UTC time.
tz-02, the system will minus 2 hours based on the UTC time.
※
UTC time has been set as default time.
4. User defined name in SMS content
Command: name1, user name
C0
- 8 -
GPS tracking system
EN