Publicité
Les langues disponibles
Les langues disponibles
10. Ringtone control
Command:
ring0
After send this command, when device accept incoming calls, device will not make a ring sound, only vibrate.
Command:
ring1
After send this command, when device accept incoming calls, device will make a ring sound and also vibrate.
11. Geo-Fence Alarm
Command:
G+X, Y,
Z,
xxxM/KM
Example:
G1,1,1,100M
Notes: No spaces in between.
X=No. of Geo fence (1~3), user can set 3 Geo fences
Y=0 means to turn off the function
Y=1 means to turn on the function
Z=1 means to set alarm when the tracker enters the preset area
Z=0 means to set alarm when the tracker breaches the district
xxx
is the preset distance to the tracker's original place, must be 3 digitals. M means meters, KM means kilometers
The device will send the message to the authorized numbers as "Geo fence alarm!+GPS info" when it enter the area you set.
(User must set this function when the blue light is flashing rapidly.)
To turn off this function, please send
G1,0 or G2,0 or G3,0
- 11 -
GPS tracking system
EN
Publicité
