AnteaMED oppla Mode D'emploi page 25

Switching the device on and off
- To turn on the device: press the side power button for 1 second, all the LEDs will flash rapidly. Device can be also turned on automatically by charging
via USB or put it into the docking station.
※
To get an initial location, use outdoors or near a window so the device may fix onto the satellites.
- To turn off the device: press and hold the side button and SOS button together for 1 second until the LEDs off.
What do the lights mean?
Blue ON(solid)
LED
State The device is charging
Light shows a single flash rapidly every 3
LED
seconds
The device is connected to the GSM
State
network
Power Status LED
Blue Blinking Quickly
Battery power is lower than 15%
GSM LED--GREEN
Light shows a double flash rapidly
every 3 seconds
The device is registered to the
GPRS network
- 5 -
Blue Off or blinking slowly
Device has been fully charged or not charging
Light shows a slow flash every 3
seconds
The device is connecting to the
GSM network
GPS tracking system
Light Solid (not flashing)
No SIM Card is detected
EN