Dimplex Sierra 48 Mode D'emploi page 14

Operation
7 days timer setting
Step 4: Hold 5 seconds to enter the 7 days timer setting.
Step 5: When flash, press to set the automatically turn on Tuesday.
Step 6: Press to set the automatically turn on time at 17:00.
Press to set the room temperature to 25�C.
Step 7: Press to set the automatically turn off time at 18:00 on
Tuesday.
Step 8: Turn off the fireplace by press
Step 9: Sit and wait and the fireplace will turn on automatically in a few minutes.
Step 10: Fireplace will turn on automatically. Wait 1 hour, then the fireplace will
automatically turn off.
You have now successfully set the 7-day timer
NOTE: All the settings will be cleared when the fireplace is unplugged.
.
- 26 -
Operation
This Power button turns the fireplace on or off. It has a memory function,
pressing the Power button once to turn power on. Pressing the Power
button again will turn the power off.
The Heater button turn the heat on or off. Pressing the Heater button once
27
turns the Heat on, and
C
the desired temperature. 18-27 and ON is optional, ON means the heating
keep working.
Pressing the Flame button once,
button to set the desired flame colour, the display on the remote control
will change accordingly.
Pressing the Flame button again,
button to set the desired flame brightness level.( High
, Low ). Hold the flame icon for 5 seconds to turn the sound of flame
burning ON or OFF.
Pressing the Ember Bed button once,
button to set the desired Ember Bed colour, the display on the remote
control will change accordingly.
Pressing the Ember Bed button again,
or button to set the desired Ember Bed brightness level.( High
Medium , Low ).
Pressing the Timer button
to set the desired timing. 1-8 hour and off is optional.
The seventh button turn the 7 day timer function on or off.
- 27 -
EN
will flash, press or button to set
and will flash, press or
and will flash, press or
, Medium
and will flash, press or
and , will flash, press
,
888
and will flash, press or button