Jimmy HW9 Mode D'emploi page 5

Packing list
Part Name Mainbody
Quantity
Cleaning
Part Name
Solution
Quantity
Product assembly
Noted: Cut off electricity before product assembly and
disassembly.
Handle assembly and disassembly
Insert the handle into the mainbody vertically until
a"click"sound is heard. Make sure handle is firmly
locked. To disassemble the handle, use a hard tool to
insert into the handle release hole and meanwhile pull
out the handle upward.(Fig 1)
Floorhead assembly and disassembly
Insert the floorhead into the mainbody vertically until
a"click"sound is heard. Make sure floorhead is firmly
locked.To disassemble the floorhead,press down the
floorhead release button, then hold the floorhead and
pull the floorhead down.(Fig 2)
Assemble battery pack
Press and hold the battery cover latch and remove the
battery cover.Then,slide battery pack along the slot into
mainbody until to the bottom, and then install the battery
pack cover into the body until the clear "click" sound is
heard. To remove battery pack, it can be disassembled
according to the opposite direction of installation. (Fig 3)
Assemble the charging base holder
Press the holder 1 and holder 2 into the charging base,
aiming at the slot until a "click" sound is heard. Make
sure the holders are firmly locked.( Fig 4)
Place machine to charging base
To put machine back to charging base, hold machine
handle to lift the machine, aim charging slot on bottom
of machine to the charging socket on charging base and
put the machine into charging base. To use the machine,
hold machine handle and lift out machine from charging
base. (Fig 5)
Handle
1 1
Cleaning
brush
1 1
Floorhead
Battery pack
Assembly
1 1
Holder 1 Holder 2
1 1
Handlve
1
2
3
Holder 1
4
5
Charging
base
1
Carpet Instruction
brushroll
1
Floorhead
release
Battery cover
latch
Battery cover
Holder 2
Charging slot
Charging socket
Adaptor
1
manual
1
Handle
release
hole
Battery
cover
Battery
pack
3