DirectHome MEDICAL Somnetics Transcend II Portable miniCPAP Guide Rapide page 8

Replacing the Air Inlet Filter
Transcend's air inlet filter should be replaced
every six months. To purchase a new air inlet
filter, please contact your home healthcare
provider.
1. Remove the filter plate by gently
squeezing the tab at the back of the plate
towards the front of the plate and pulling
the plate away from the CPAP.
2. To replace the new filter plate, lay it on
the bottom of the CPAP. Snap the front
clips into place first; then the back clips.
Make sure the filter plate is completely
connected and discard the used filter
plate.
0473
SOMNETICS, INTERNATIONAL, INC.
33 5TH AVE NW, SUITE 500
NEW BRIGHTON, MN 55112
PHONE: 651.621.1800
TOLL FREE: 877.621.9626
FAX: 651.204.0064
AUTHORIZED REPRESENTATIVE (MDD 93/42/EEC)
EUROM - SERVICE, LTD.
HELMHOLTZSTR. 2
10587 BERLIN, GERMANY
TELEPHONE +4903180453
1
2
©2012 Somnetics International, Inc. All rights reserved.
103099 REV G