DirectHome MEDICAL Somnetics Transcend II Portable miniCPAP Guide Rapide page 5

POWERING YOUR TRANSCEND
Your Transcend comes with the universal AC
power supply used with a wall outlet. The power
supply can be used worldwide with standard
plug adaptors suitable for the country you are
visiting. Your system may arrive with a wall
mount power supply and three interchangable
blade options. Do not use a power converter
with your Transcend, as it may damage the
device.
To use the universal AC power supply:
1. Connect the power cord to the power
supply adaptor (A).
2. Connect the power supply to wall outlet
power.
3. Insert the barrel connector into the power
jack on the back of the device; be sure the
connector and cord are facing up (B).
4. The control panel has green and yellow
LED indicator lights. When connected to the
power source, the yellow LED will flash
once followed by three quick flashes of the
green LED.
5. Once the LED power-up flash sequence is
complete, the device enters Standby mode
and is ready for use (lights will be off).
Your Transcend can also be powered by an optional mobile power adaptor, or the optional
Transcend battery systems.
TRANSCEND QUICK GUIDE • ENGLISH
1
A
3
• PAGE 5
B