E-Mu CREATIVE PROFESSIONAL PIPEline Mode D'emploi page 10

Connecting a unit as a Receiver
1a
1a Powered stereo or 2.1 speakers, headphones or line
level input amplifier
1b Stereo to RCA cable
1c Stereo cable
1d RCA 75-ohm digital cable (S/PDIF 48 kHz connection)
2a Optional 5V power supply adapter
2b AC power outlet
NOTE
When E-MU PIPEline™ is set as a receiver, you can engage a
limiter when in analog output mode to minimize the effects of
clipping. Set the D/A switch to the middle position as indicated in
the table found on page 5.
Connect your E-MU PIPEline™ units 7
1b
OR
1c
FIEXI
JACKS
1d
2a 2b