Prior To Use; Inserting The Battery - SilverCrest SPW 180 B2 Manuel D'utilisation Et Informations Sur Les Services

Prior to use

Inserting the battery

To insert the lithium battery CR2032, open the
cover of the battery compartment at the rear of the
glass scales by slipping your finger into the slot on
the side of the battery compartment (4). Now
remove the cover of the battery compartment (4)
and insert the enclosed lithium battery CR2032.
Pay attention to the polarity when inserting the
battery. This is
compartment (4), and the + symbol on the lithium
battery CR2032 must be visible, as shown in the
adjoining illustration. Then replace the cover on
the battery compartment (4). The glass scales are
now ready to use.
indicated in the battery
SilverCrest SPW 180 B2
English - 33