Before Operating; To Set The Clock; Stop/Clear - Electrolux TINSEB425MRR0 Guide D'utilisation Et D'entretien

• Before operating your new oven make sure you
read and understand this operation manual
completely.
• Before the oven can be used, follow these
procedures:
1. Plug in the oven. Close the door. The oven
display will show WELCOME.
2. Touch the STOP/CLEAR pad.
appear.
3. Set clock. See below.
4. Follow directions on page 34 for using the
Refresh Cycle.

TO SET THE CLOCK

• Suppose you want to enter the correct time of
day 12:30.
PROCEDURE
1. Touch Clock and
number pad 2.
2. Enter the correct time
of day by touching
1
the numbers in
sequence.
3. Touch Clock again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the
display. Touch the STOP/CLEAR pad and re-set
the clock.
•
: will

STOP/CLEAR

Touch the STOP/CLEAR to:
1. Er a s e i f yo u m a ke a m i s t a ke d u r i n g
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
2
Timer
Clock 5. Cancel a program during cooking, touch
2 3 0
Timer
Clock

Before Operating

If the electrical power supply to your oven
should be interrupted, the display will intermit-
tently show WELCOME after the power is
reinstated. If this occurs during cooking, the
program will be erased. The time of day will
also be erased. Simply touch STOP/CLEAR
and reset the clock for the correct time of day.
programming.
twice.
15