Fitting The Feet - Klarstein St. Moritz Mode D'emploi

This stove is supplied with the feed removed in order to prevent damage during transportation. To
fitting the fect, please follow these instructions:
Remove leg from the bag and locate and line up
hole in the leg with holes in the underside of the
stove body. Repeat the above for the other three
legs.
Tbis is how the leg looks when attached correctly. This is how the stove will look when all four legs
11

Fitting the Feet

Step 1
Step 3
Step 2
With use of a screwdriver, secure leg with the
three screws provided (The Screw is with the
manual). Repeat the above for the other three
legs.
Step 4
are in place.