Technoline WS 9750 Manuel D'utilisation page 56

2. Insert the batteries to the first transmitter.
3. Within 30 seconds of powering up the first transmitter, insert the batteries to the
Temperature Station. Once the batteries are in place, all segments of the LCD
will light up briefly. Following the indoor temperature, the Weather girl icon and
the time as 0:00 will be displayed. If they are not shown in LCD after 60 seconds,
remove the batteries and wait for at least 60 seconds before reinserting them.
4. The outdoor temperature from the first transmitter (channel 1) should then be
displayed on the Temperature station. Also, the signal reception icon will be
displayed. If this does not happen after 2 minutes, the batteries will need to be
removed from both units and reset from step 1.
5. Insert the batteries to the second transmitter as soon as the outdoor temperature
readings from the first transmitter are displayed on the temperature station.
56