ESAB Aristo Feed 3004 Manuel D'instructions page 28

PIÈCES USÉES
Item Ordering no.
HI6
HI7
HI8
HI9
HI10 0469 838 001 Cover
HI11 0458 722 880 Axle and Nut
HI12 0459 441 880 Gear adapter
HI13 0455 049 001 Inlet nozzle
HI14 0458 999 001 Shaft
HI15
HI16 0458 748 002 Insulating washer
HI17 0458 748 001 Insulating bushing
Item Ordering no.
HI18 0156 602 001 Inlet nozzle
Welding with aluminium wire
In order to weld with aluminium wire, proper rollers, nozzles and liners for aluminium wire
must be used, It is recommended to use 10 ft. (3 m) long welding torch for aluminium wire,
equipped with appropriate wear parts.
0444 408 331
Denomination
Washer Ø 16/5×1
Screw M4×12
Screw M6×12
Washer Ø 16/8.4×1.5
Ø 0.118 in. (3 mm) for 0.023–1/16 in. (0.6–1.6 mm)
Fe, Ss, Al and cored wire
Nut M10
Denomination
Fe, Ss, Al & cored Ø 3/32 in. (2 mm) plastic for
Notes
Wire type
0.023–1/16 in. (0.6–1.6 mm)
- 28 -
Wire dimensions
© ESAB AB 2021