Lionelo Mika Manuel De L'utilisateur page 13

How to install and detach front wheels
1.
Insert the wheel shank into corresponding holes on the stroller frame
(fig. 2). Correct installation is signaled by a click.
2.
To detach front wheels, press the releasing key (1, fig. 2) and take
wheels out.
How to install and detach rear wheels
1.
Insert the wheel shank into corresponding holes on the stroller frame
(fig. 3). Correct installation is signaled by a click.
2.
To detach rear wheels, press the releasing key (2, fig. 3) and take wheels out.
How to install the bow
1.
Insert the bow into corresponding holes on the stroller frame (fig. 4).
Correct installation is signaled by a click.
2.
To detach the bow, press releasing keys and then take the bow out.
How to install and detach the seat
1.
The seat can be installed in a forward- or rear-facing position.
2.
Place the seat on connectors on the stroller frame (fig. 5). Correct
installation of the seat on the stroller frame is signaled by a click. Make
sure the seat has been correctly installed in the stroller frame.
3.
To detach the seat from the stroller frame, push releasing levers on both
sides of the seat and then lift it upwards (fig. 5).
How to install and detach the carrycot
The child can be transported in the carrycot.
1.
Undo the inner covering zip (fig. 6) and insert metal bars into carrycot
brackets (fig. 7).
2.
Zip the inner covering up and then insert the mattress (fig. 8).
3.
Put the fabric cover on the carrycot handle, and then pull up the zipper.
To unfold the sunshade, press the keys on both sides of the carrycot
and set the sunshade in a desired position (fig. 9).
4.
Insert adapters (14, fig. B) into corresponding spots on the stroller frame
until you can hear a double click and adapters get blocked. Adapters
must be placed with the detachment key into a stroller front direction.
‑ 13 ‑ EN