Hoover WH21000 Guide D'utilisation page 10

WARNING:
To reduce the risk of
personal injury - Unplug the steam cleaner
when assembling the accessories
WARNING:
Do not clean over floor
electrical outlets Do not use steam cleaner
or press the Steam Trigger without water in
the Main Water Tank
IMPORTANT:
When using on carpets,
always ensure the multi-surface Microfiber
Pad is properly attached to the Floor Head
• The steam cleaner and accessories get very
hot during use, always allow them to cool
down before handling.
WARNING:
Do not clean over floor
electrical outlets Do not use steam cleaner
or press the Steam Trigger without water in
the Main Water Tank
10
Refreshing carpets
1. 2.
Place the microfiber pad With microfiber pad attached,
on the floor white side hook the steam cleaner into
facing up. Place floor the front of the carpet glider
head onto pad making and push to clip into place.
sure the entire pad covers Carpet glider should only be
the floor head. used when refreshing carpets.
Using tile and grout scrub brush and SteamStream
1. 2.
Place foot on outer floor Move steam cleaner back
head and gently pull and forth across the floor,
away steam cleaner to getting into corners and
release the tile and grout awkward places.
scrub brush.
3. 4.
Move the steam cleaner To release the carpet
slowly backwards and glider, place foot on
forwards across the floor. clip and push down. Lift
Squeeze and release steam cleaner to unhook
trigger as required. and remove.
3.
To engage SteamStream™ from the front
nozzle, press the SteamStream™ button
to activate, and squeeze the trigger to
release steam. Press the SteamStream™
button to turn OFF (0=OFF).
™