Publicité
Les langues disponibles
Les langues disponibles
2. Press the SELC key and select any channel
3. Press the SELG key for 10 seconds.
The icon of Channel 1 blinks showing its state ON (active) or
OFF (inactive)
4. Using the UP and DOWN keys, select the ON (active) or OFF
(off) state of the channel, press MENU to confirm and proceed
to the next channel.
5. Select the ON state for all the channels that must belong to
the group.
NOTE: When the channels are activated they stay on
(example)
6. After setting channel 12, press MENU to confirm.
The channels that have been selected for the group blink
twice to confirm that the operation was successful
7. TX PLUS 12D automatically exits the GROUP programming
mode and displays the group you have just set
8. To program additional groups, repeat the procedure
NOTE: TX PLUS 12D allows to program 8 groups. When
8 groups have been programmed, to enter a new one
you must delete an existing group: see section "Deleting
Groups"
DELETING GROUPS
1. Select the group to be deleted by pressing SELG
2. Hold down the SELG key until the channels of the group blink
for 2 seconds and then go off. The group has been deleted.
AUTOMATIC OPERATION LOGIC
The AUTOMATIC operation logic of the remote TX PLUS 12D
allows automatic control of the automations based on the
scheduled EVENTS.
NOTE: Before proceeding with event programming, make
sure that the time and date settings are correct.
To control the different automations it is necessary to save TX
PLUS 12D in the different devices.
NOTE: store the channels with a suitable logic so as to
simplify the management of the automations.
To store TX PLUS 12D in the control units, the MANUAL mode
must be active; follow the procedure described in the instruction
manual provided with the control units.
EVENTS SCHEDULING
1. The remote must be in AUTO mode.
If it is in MANUAL mode, press SELC for 10 seconds, the
display shows (example)
2. Press the MENU key until the PROG icon turns on while
EVENT blinks
3. Press the MENU key to confirm:
EVENT is steadily on and the icon of the day (e.g. Su) blinks.
- 17 -
Publicité
