ACM TX PLUS 12D Mode D'emploi page 14

OPERATION OF THE KEYS
The keys operate differently depending on the operating mode of
the remote.
Manual mode
UP Transmits by radio an opening
command
STOP Transmits by radio a stop command
DOWN
Transmits by radio a closing command
SELC -
-
SELG -
-
UP - DOWN - MENU Allow navigation of the groups
programming menu
AUTOMAT mode
SELC -
-
SELG Allows you to view the scheduled
events on a given day
UP - DOWN - MENU Allow navigation in the programming
menu
MENU
Activates programming (continuous
pressure on the key for 5 seconds)
FUNCTIONING OF THE BUTTON PROG
AND DIP-SWITCHES (MANUAL MODE)
The button PROG and the DIPSWITCHES program the functions of
the control units controlled by the transmitters PROTEO.
Read carefully the section "PROGRAMMING OF THE FUNCTIONS
BY MEANS OF TRANSMITTERS OF THE RANGE PROTEO" in the
handbook of the control unit or in the one of the tubular motor
with integrated electronic card.
Selects the desired radio channel
(1 to 12) or all channels
Changes the operating logic from
MANUAL to AUTO (continuous
pressure on the key for 10
seconds)
Selects the desired channel group
(1 to 8)
Activates groups programming
(continuous pressure on the key
for 10 seconds)
Allows you to scroll through the
days of the week to see if there
are scheduled events.
Changes the operating logic from
AUTO to MANUAL (continuous
pressure on the key for 10
seconds)
SELC
DIP-SWITCHES
PROG
- 14 -
SELG
UP
STOP / MENU
DOWN