Publicité
Les langues disponibles
Les langues disponibles
ENG
The AT51113 rollator is made of high-quality, durable aluminium. The folding frame makes transport easier. The
rollator is equipped with front swivel castors and rear fixed castors with a brake and a parking clip. The product has
an additional seat and backrest, which enables the user to rest in a sitting position. The rollator is also equipped with
a convenient bag for essential items or small groceries.
Warnings
Check the condition of the device before performing any activities. If the product functions incorrectly or looks
defective, please contact the dealer from whom it was purchased immediately. Antar assumes no responsibility for
improper use of the device.
Product composition:
frame
aluminium
castors
PVC
handles
Preparation for use
The type of aid device and its appropriate configuration must be selected by the qualified medical and technical
personnel based on disease and method of using the device by the user.
1. Unfold the frame by lowering the transverse tubes of the seat.
2. Adjust the height of the handles and armrests.
3. Attach the bag.
4. Attach the centre belt (Fig. 1), make sure the belt tension is correct to prevent the rollator from folding
accidentally.
Using the brakes
1. To release or stop the rollator, pull on the brake lever. Release the brake lever to move again (Fig. 1).
2. To activate the parking brake, push the brake lever down until it locks (Fig. 2).
Chodzik AT51113_ins_multi_003.indd 2
plastic
armrest padding
polyurethane
seat
nylon and polyester
Fig. 1
- 2 -
Fig.2
2022-06-13 16:44:20
Publicité
