How To Install; Step 1: Where To Install - SELFSAT H22dCSS+ Serie Manuel Utilisateur

How to install?

You will be able to install SELFSAT-H22dCSS+ easily by yourself by following
this manual step by step.
Before installing your antenna, you have to check that SELFSAT-H22dCSS+ box contains all the items
listed above in the 'Contents'. In the event of any missing parts, please contact your distributor.

Step 1: Where to install?

In order to receive a signal from the Satellite, SELFSAT-H22dCSS+ has to be installed in an open space
(outside the house or the apartment), in the direction of the satellite towards the equator, for which, you
will need a compass to exactly orient SELFSAT-H22dCSS+ toward the satellite.
Note
Please take reference to the table of the Azimuth angles specified in the back pages of this manual.
< Compass >
Note
To ensure an accurate compass reading, stay away from large metal objects, specifically electrical
cables and then make multiple readings.
Make sure that there are no obstacles in front of SELFSAT-H22dCSS+ which can decrease the signal
reception quality, such as buildings or trees (you may keep in mind that trees will grow and may block
the signal).
In order to be able to fix and install your antenna easily, you might choose an easy accessible place
without any potential danger for installation.
Think about the way you prefer to place your cable in a discreet way from the SELFSAT-H22dCSS+ to
your STB. The antenna should not be too distant from your STB; a cable longer than 30 meters may
decrease the quality of the signal.
Bad Quality Signal Reception
N 0˚
S 180˚
Good Quality Signal Reception
Satellite position
Azimuth Angle
5