LiftMaster ATSW Mode D'emploi page 30

Operation
Connect With Your Smartphone
The Wi-Fi door operator is compatible with up to 16 myQ enabled accessories. Up to 10 devices can be paired to the
Wi-Fi door operator's internal gateway. These devices can be controlled with the myQ app. These devices include any
combination of myQ door operators, Wi-Fi door operators, myQ light controls, myQ gate operators or myQ
commercial door operators. A LiftMaster Internet Gateway (828LM) can be added if you need to control more than 10
devices using the myQ app. Up to 6 devices can be paired to door operator itself (controlled by door operator through
900MHz). These devices include any combination of myQ light controls or a door and gate monitor.
You will need:
Wi-Fi enabled smartphone, tablet or laptop
l
Broadband Internet Connection
l
Wi-Fi signal in the building (2.4 Ghz, 802.11b/g/n required), see page 4
l
Password for your building's network (router's main account, not guest network)
l
myQ serial number located on the door operator
l
Connect Your Door Operator to Your Building's Wi-Fi Network
Open and close your door, get alerts and set schedules from anywhere. Connected smart door operators also receive
software updates to ensure the operator has the latest operational features.
1. Download the myQ App.
2. Set up an account and connect.
For more information on connecting your door operator, visit support.chamberlaingroup.com.
LED
An LED on the garage door
opener will indicate Wi-Fi
status. See table below.
Push
Button
Light
Button
Wi-Fi Status
LED Definition
Blue Off - Wi-Fi is not turned on.
Blinking - door operator is in Wi-Fi learn mode.
Solid - Mobile device connected to the door operator.
Blue and Green Blinking - Attempting to connect to router.
Green Blinking - Attempting to connect to the Internet server.
Solid - Wi-Fi has been set up and door operator is connected to the internet.
If you need help adding devices to your myQ account, or to learn more go to
support.chamberlaingroup.com.
30