Kuppersbusch B6335.0 Mode D'emploi page 26

3. Select a function and a cooking temperature
using the oven commands.
4. Once the cooking time is up, the oven will
turn off, an alarm will sound and the
symbol will flash quickly.
5. Touch any key to stop the alarm and turn off
the symbol. The oven will switch on again.
6. Set the controls to the
the oven.
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
NOTE
With the Cooking Time function, the
remaining time will show permanently on the
display. You cannot see the current time on
the display when this function is set.
Programming the Cooking Stop Time
1. Touch or
display starts to flash and press
see the current time on the timer display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time. The
bol will flash slowly.
3. Select a cooking function and temperature.
4. When the cycle is finished, the oven will turn
itself off, a buzzer will sound and
will flash quickly.
5. Touch any sensor to stop the alarm and to
turn off the , symbol. The oven will switch
on again.
6. Set the controls to the
the oven.
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
26
User's Guide
position to turn off
or until the
until the symbol on the
. You will
or
position to turn off
or until the
Programming Cooking Time
and Cooking Stop Time
1. Touch
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the cooking time by touching
. Next, a double beep will sound, the re-
maining time will appear on the display and
the
3. Touch
display starts flashing, then press
will see the expected completion time on the
to
timer display.
4. Select the cooking end time by touching
or
current time will be displayed on the display.
5. Select a cooking function and temperature.
The oven will remain disconnected with the
and
programmed.
6. When it is time to start cooking, the oven will
turn on and will operate for the programmed
cooking time.
7.
While cooking, the cooking time remaining will
be displayed and the
slowly.
. You
8. When the cooking time is up, the oven will
turn off, a buzzer will sound, and the
symbol will flash quickly.
sym-
9. Touch any sensor to stop the buzzer and
turn off the
on again.
10. Set the controls to the
symbol
off the oven.
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
to
or until the
symbol will flash slowly.
or until the
. Next, a double beep will sound and the
symbols lit up. The oven is now
symbol. The oven will switch
or
symbol on the
. The
or
symbol on the
. You
symbol will flash
position to turn
until the
to