Publicité
Les langues disponibles
Les langues disponibles
Electronic clock/timer description
2
KEYS
1
,
and
: Enable you to programme the
electronic clock/timer functions.
SYMBOLS
2
Clock Settings
TIMER: Lights up when the clock/
timer is selected. Generates an acoustic
signal when the time is up. The oven does
not turn off at the end of the timer period.
This function can also be used while the
oven is cooking.
PROGRAMMING: Light up to indi-
and
cate that the oven is programmed (cooking
time, stop time or total).
•
Cooking Time: This function allows you
to programme the cooking time, after which
the oven will turn off automatically.
If a cooking time has been selected and the
oven is switched off manually before the pro-
grammed time has finished, the clock will
continue to display the time until the end of
the process.
•
Cooking Stop Time: This setting al-
lows you to programme the time for cook-
ing to stop, after which the oven will turn off
automatically.
•
and
Cooking Time and Cooking
Stop Time: This setting allows you to pro-
gramme the cooking time and cooking stop
time. The oven switches on automatically at
24
User's Guide
1
2
the set time and operates for the selected
cooking time (Cooking Time). It then switch-
es off automatically at the indicated time
(Cooking Stop Time).
CLOCK/TIMER LOCK: Indicates that the
touch keys for the clock/timer are locked,
preventing modifications by small children.
Other functions
HEATING: Indicates that the oven is trans-
mitting heat to the food.
ÖKOCLEAN: Lights up while the Küppers-
busch ÖkoClean
WARNING
The sensitivity of the touch keys adapts
continually to environmental conditions.
Make sure the surface of the control panel is
clean and free of obstacles when plugging
in the oven.
If the clock does not respond correctly when
you touch the keys, unplug the oven for a
few seconds and then plug it in again. Doing
this causes the sensors to adjust automati-
cally so that they will react once more to fin-
gertip control.
SETTING THE TIME
•
To set the time on the oven, the function and
temperature dials must be in the
•
When you plug in the oven, you will see the
clock flashing 12:00.
•
Touch
or
then the minutes. You will hear a double
beep confirming the time is set.
•
If you wish to modify the time, touch
until the time starts flashing. Touch
and and follow the instructions in the previ-
ous point.
function is in progress.
®
position.
to adjust the hours and
or
Publicité
