Connecting Headphones; Connecting The Amplifier To The Mains - Renkforce T21 Mode D'emploi

c) Connecting headphones
The amplifier features a headphone socket (2) for connecting headphones.
• Insert the jack plug on your headphones into the headphone socket (2).
• If the jack plug does not fit into the socket, use an adapter.
The speakers are automatically disabled when headphones are connected.

11. Connecting the amplifier to the mains

The mains socket must be easily accessible so that the amplifier can be easily disconnected from the
mains in the event of a fault.
Make sure that the voltage indicated on the amplifier corresponds with your household mains voltage.
Never attempt to operate the device with any other type of voltage.
Do not let the mains cable come into contact with other cables.
Exercise caution when handling mains cables and mains connections. Mains voltages can cause fatal
electric shocks.
Do not leave cables lying around; ask an electrician to lay them properly to prevent the risk of an accident.
• Insert the mains cable into the power-in socket (13) on the amplifier.
• Insert the mains plug into a grounded mains socket.
26