Publicité
–
+
ELEC
STARTING SYSTEM
Br
B
STARTER RELAY
1. Inspect:
• Brown lead terminal
• Black lead terminal
Loose → Tighten.
2. Check:
• Starter relay
Faulty → Replace.
Checking steps:
• Connect the tester leads between the
starter relay terminals as shown.
• Connect the brown lead terminal to the
positive battery terminal.
• Connect the black lead terminal to the
negative battery terminal.
• Check that there is continuity between
the starter relay terminals.
• Check that there is no continuity after the
brown or black lead is removed.
REMOTE CONTROL UNIT
Refer to "REMOTE CONTROL SYS-
TEM".
7-31
E
Publicité
Chapitres
