Publicité
JET
PUMP
BEARING HOUSING
Bearing removal
1. Remove:
• Bearing
Driver handle—large:
YB-06071
Driver rod LS:
90890-06606
Drive shaft taper roller bearing
cup installer:
YB-06156
Bearing outer race attachment:
90890-06626
NOTE:
• Install the bearing with the same special
tools that were used for removal.
• Support the intermediate housing with steel
blocks 1 and press the bearing.
Bearing, intermediate drive shaft, and
grease hose inspection
1. Inspect:
• Bearing
Rotate the inner race by hand.
Damage/rough movement → Replace.
• Intermediate drive shaft
Damage/pitting → Replace.
• Grease hose
Cracks/wear → Replace.
Driven coupling inspection
1. Inspect:
• Driven coupling
• Driven coupling damper
Damage/wear → Replace.
6-28
E
Publicité
Chapitres
