Table Des Matières; About This Manual; Safety Rules; General Power Tool Safety Warnings - Festool OF 1010 EQ Guide D'utilisation

Table of contents
About this manual ............................................. 3
Safety rules ..................................................... 3
General Power Tool Safety Warnings ............... 3
Specific Safety Rules ........................................ 4
Technical data .................................................. 5
Symbols ........................................................... 5
Functional description ..................................... 5
Use for intended purpose ................................ 5
Electrical connection ....................................... 6
Switching the machine on and off .................... 6
Electronics ....................................................... 6
Tool settings .................................................... 7
Chips extraction ............................................... 7
KSF-OF chip catcher ........................................ 7
Milling cutters .................................................. 8
Clamping collet changing ................................ 8
Adjusting the milling depth .............................. 8
Working with the router .................................. 9
Support of the workpieces ............................... 9
Aluminium processing ................................... 10
Freehand routing ........................................... 10
Routing with the parallel guide ...................... 10
Routing with the TV-OF extension table ........ 10
Routing with the FS guide system ................. 10
Routing with the SZ-OF 1000 beam
compasses ...................................................... 11
Copy cutting .................................................... 11
Edge band trimming ....................................... 12
Accessories, tools .......................................... 12
Servicing and maintenance ............................ 13

About this manual

Save these instructions
It is important for you to read and understand this
manual. The information it contains relates to
protecting your safety and preventing problems.
The symbols below are used to help you recognize
this information.
Description of imminent hazard
D AN GER
and failure to avoid hazard will
result in death.
Description of hazard and
W ARN I N G
possible resulting injures or
death.
Description of hazard and
CAUTI ON
possible resulting injuries.
Statement including nature of
N OTI CE
hazard and possible result.
Indicates information, notes, or
H I N T
tips for improving your success
using the tool.

Safety rules

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
3