History Menu; Control By Phone Call; Method 1; Method 2 - Medion P89400 Mode D'emploi

LANGUAGE
Here you can change the system language. "Language" refers to the lan-
guage of the SMS that you receive from the base station and also the menu
on the display.
RESET
All system settings will be reset to the default values.
Saved phone numbers and connected accessories will be deleted.
ABOUT
You can find out about the firmware installed on the wireless alarm system
here.

History menu

Select the desired settings for logging events and press "Enter".
The last 150 event logs will be saved by the base station.

Control by phone call

This function is only available when it has been activated on the base sta-
tion, as described in "Control by Phone" on page 95 of this manual.

Method 1

If an alarm has been triggered, the saved phone numbers will be called by
the base station. When the call is answered, the base station can be con-
trolled at a distance by following the spoken instructions.

Method 2

1. Call the phone number of the base station (either the number of the SIM
card in the base station or the number of the landline phone connection
to which your base station is connected). Once you have established a
connection, enter the access code by following the spoken instructions.
2. Enter the access code (user code), followed by a "#".
3. A voice recording will give you a list of options to select.
4. Select from the different actions for controlling the base station (see in-
structions in the following table).
98 of 168