Medion P89400 Mode D'emploi page 98

Siren Setup
In siren volume
Here you can set the volume of the siren.
Siren Alert Time
You can set here how many minutes the siren sounds in the event of an
alarm.
Built-in Siren, Wired Siren and Wireless Siren
NOTICE!
The item Built-in Siren refers to the siren integrated into the base station.
Wireless Siren refers to an external siren that is connected wirelessly with
the base station (MD 91406).
Wired Siren refers to a siren that is connected to the cable terminals SP and
GND on the base station.
The following settings can be made for each siren:
ON or OFF?
You can turn the siren on or off here.
Arm/Disarm Tone
The confirmation tone that sounds when arming/disarming the system can
be turned on (Yes) or off (NO) here.
Arm Upload
Activates notifications by SMS (only in GSM mode)
Disarm Upload
Deactivates notifications by SMS (only in GSM mode)
Call recycle
When the alarm is triggered, the base station calls the numbers you have
saved. If the system is not disarmed, the base station will call you again (up
to nine times). The function "Call recycle" is used to define the number of
times that the base station attempts to call you.
Backlight Time
Set the time for the display lighting from 000 to 300 seconds here.
DE
EN
FR
97 of 168