Medion P89400 Mode D'emploi page 110

Problem
No response from the
base station after issu-
ing a command from
the remote control
System cannot be dis-
armed using an RFID
tag
It is not possible to ac-
cess the settings for the
base station
Cause of the error
The remote control has
not been connected to
the base station
The distance between
the remote control and
the base station is too
large
The RFID tag has not
been connected to the
base station
You are not in the menu
for the base station
Solution
You can find instruc-
tions for connecting
the remote control
to the base station in
this manual
Transmission range
for the remote con-
trol: 80 m (in open
spaces)
A signal repeater
can be installed to
increase the transmis-
sion range
You can find instruc-
tions for connecting
an RFID tag to the
base station in this
manual
Enter your admin
code, followed by
"Enter" to access the
menu.
109 of 168
DE
EN
FR