Light Source For The Transmitted Light Axis; Electrical Connection Of The Microscope - Leica DMil Mode D'emploi

6. Assembling the Microscope

6.7 Light source for the transmitted light axis

Note:
The Leica DMi1 is equipped with integrated LED
illumination. The service life of the LED is about
above 35000 hours. If, despite this, it should be
necessary to change the LED, this task must be
carried out by Technical Service only.

6.8 Electrical connection of the microscope

Caution!
Do not connect the microscope and supply
unit* to the power supply until all options are
installed.
The power plug may only be plugged into an
outlet equipped with a grounding contact.
Do not interfere with the grounding function
by using an extension cord without a ground
wire.
If you purchased additional options with the
microscope, install these options first (see next
chapter).
26