Klarstein Steakhouse Pro Mode D'emploi page 35

Function change key
If you press this button once, you can switch between the temperature setting
1
(4) and the humidity setting (5). You can increase / decrease the temperature
and humidity by pressing the Increase (6) and Decrease (7) buttons.
On / off
Press and hold this button for three seconds to turn off the device. All functions
2
except for the light will be switched off. Press this button again (with a delay)
to switch the
UV system control
• Automatic control: The device is switched on. The UV light will be
automatically activated for one hour every 24 hours.
• Manual control: The device is switched on. If you press and hold this
3
button for 3 seconds, the UV light will be permanently on. If you press
and hold this button again for 3 seconds, the UV light will be switched off.
• The UV light will be automatically switched off when the door is opened
and will be switched on again as soon as the door has been closed.
Temperature display
4
The current temperature is displayed.
5 Humidity indicator
Increase
6
If you press this button once, the temperature / humidity will be increased by
1 ° C / 1%.
Decrease
7
If you press this button once, the temperature / humidity will be reduced by
1 ° C / 1%.
Temperature unit
8
You can switch from ° C to ° F by pressing this button. Press this button again
to change from ° F to ° C.
EN
35